| Title: |
CB&Q 0-4-0 176 |
| Description: |
Chicago Burlington & Quincy Railroad 0-4-0 176 at Philadelphia, Pennsylvania, April 1871, photo by Baldwin Locomotive Works, Chuck Zeiler collection. This locomotive would have been classed E-1 but was retired before the Burlington implemented the locomotive classification system in 1898. The following is from the book, "Steam Locomotives of the Burlington Route", by Bernard C. Corbin and William F. Kerka: The first locomotives purchased directly by the Burlington System from the Baldwin Locomotive Works were the two 0-4-0 types completed in April 1871 and numbered 176 and 177. The boilers had copper fireboxes and iron tubes, and were of the wagon-top type. The water injection system consisted of two crosshead-driven pumps and one steam-fed injector. Stephenson valve-gear motion was used. The tenders were of the typical eight-wheeled type with straight tank tops and a capacity for 1,600 gallons of water. In appearance the locomotives were very similar to engine number 202, an 0-4-0 built at the CB&Q shops in 1877. The early Baldwins, however, were elaborately painted and finished with brass cylinder casings, steam chests, and domes. Polished brass jacket bands also encircled the boiler. Engines 176 and 177 had 16"X22" cylinders, drivers of 49" diameter, and each had a total engine weight of 56,000 pounds. |
| Photo Date: |
1/1/1900 Upload Date: 10/24/2009 10:38:55 AM |
| Location: |
Philadelphia, PA |
| Author: |
Baldwin Locomotive Works |
| Categories: |
Roster,Steam |
| Locomotives: |
CBQ 176(0-4-0) |
| Views: |
2679 Comments: 1 |
