12/18/2024
View Photos
·
Home
·
Newest Photos
·
Editors' Picks
·
Contributor Picks
·
By Date
·
By Photo Album
·
By Location
·
By Map
·
By Railroad
·
By Locomotive Model
·
Search
·
Frame/Serial XRef
·
Most Photographed
·
Rolling Stock
·
Contributor Sites
Members
·
Log In
·
Register
Pictures of 4-4-2's in them
Page Controls
View:
Grid
List
Pics Per Page:
10
20
30
40
50
100
Title:
CB&Q 4-4-2 P-6 2584
Description:
Chicago Burlington & Quincy Railroad 4-4-2 class P-6 2584 on September 4, 1953, location and photographer unknown, print by Tom Klinger, Chuck Zeiler collection. The location chosen based on the February 1, 1952 CB&Q Locomotive Assignment Sheet. Number 2584 was built by Baldwin in 1905 (c/n 26844) as class P-3-C (balanced compound) number 2714, rebuilt in 1928 to a simple Atlantic-type, reclassed as a P-6 and renumbered 2584. It was retired and sold for scrap in December 1953.
Photo Date:
9/4/1953
Upload Date:
5/28/2014 11:25:40 AM
Location:
Ottumwa, IA
Author:
unknown
Categories:
Steam
Locomotives:
CBQ 2584(4-4-2)
Views:
443
Comments:
0
Title:
CB&Q 4-4-2 P-6 2585
Description:
Chicago Burlington & Quincy Railroad 4-4-2 class P-6 2585, date, location, and photographer unknown, print by Tom Klinger, Chuck Zeiler collection. The chosen date and location based on the June 1, 1935 CB&Q Locomotive Assignment Sheet. Number 2585 was built by Baldwin in 1905 (c/n 26984) as a class P-3-C (balanced compound) number 2719, rebuilt by the CB&Q in 1928 to a simple locomotive, reclassed to P-6 and renumbered to 2585. It was sold for scrap in February 1951.
Photo Date:
6/1/1935
Upload Date:
5/28/2014 12:15:41 PM
Location:
Hannibal, MO
Author:
unknown
Categories:
Steam
Locomotives:
CBQ 2585(4-4-2)
Views:
339
Comments:
0
Title:
CB&Q 4-4-2 P-6-A 2591
Description:
Chicago Burlington & Quincy Railroad 4-4-2 class P-6-A 2591, date, location, and photographer unknown, print by Tom Klinger, Chuck Zeiler collection. The chosen date and location based on the February 1, 1952 CB&Q Locomotive Assignment Sheet. However, a couple of tall buildings can be seen just in front of the pilot, so I suspect this might be East Alton, Illinois. Number 2591 was built by the Rogers Locomotive And Machine Works of Patterson, New Jersey in 1903 as class P-2 number 1579, renumbered in 1904 to 2523. In 1927 it was rebuilt by the CB&Q to class P-6-A and renumbered to 2591. It was retired and sold for scrap in April 1954. The difference between a class P-6 and P-6-A was simply the original locomotives; the P-6's were Baldwins, the P-6-A's were Rogers.
Photo Date:
6/1/1935
Upload Date:
5/28/2014 1:06:38 PM
Location:
Wymore, NE
Author:
unknown
Categories:
Steam
Locomotives:
CBQ 2591(4-4-2)
Views:
401
Comments:
0
Title:
CB&Q 4-4-2 P-3-C 2700
Description:
Chicago Burlington & Quincy Railroad 4-4-2 class P-3-C 2700 at Phildelphia, Pennsylvania, sometime in 1904, photo by the Baldwin Locomotive Works, Chuck Zeiler collection. The following is from the book, Steam Locomotives Of The Burlington Route, by Bernard G. Corbin and William F. Kerka: The P-3-C engines were of the balanced-compound type. Twenty of these were built by Baldwin in 1904 and 1905, and were assigned to the road as 2700-2719. The first ten has 78 inch drivers while the rest were fittted with 74 inch drivers. The locomotives had all four of their cylinders in the same horizontal plane. The high-pressure cylinders were placed between the frame and drove the first pair of drivers through a cranked axle. The outside low-pressure cylinders were coupled to the second pair in the usual manner. Stephenson link motion controlled the steam distribution through piston valves. The inside and outside cranks on the same side were positioned 180 degrees apart so as to neutralize the disturbing forces. The first engine of this class had a one-piece, forged-steel crank axle. The rest had axles built up from nine separate pieces, this type proved more satisfactory. In general appearance, the P-3-C engines were similar to the P-2-C Atlantics except that the cylinders were located further forward to accommodate the inside driving rods to the first axle. This also resulted in a somewhat longer boiler and tube length, 19 feet for the P-3-C compared to 16 feet 9 inches for the P-2-C. Trial runs with the first P-3-C engine, No. 2700, were made in July 1904 between McCook, Nebraska and Akron, Colorado, a distance of 143 miles. Compared to three single-expansion locomotives, a 2-6-2 type and two P-2 Atlantics, engine No. 2700 developed a greater capacity and consumed less fuel and water per horsepower hour than the others. She hauled a twelve-car train, weighing about 580 tons, over the (test) distance in 32 minutes, for an average of 42.26 mph. During the same month, engine No. 2700 made a continuous run from Creston to Chicago in nine hours. The average speed for the 393 mile distance was 43.67 mph. At that time this was regarded as an unusual performance. Number 2700 was rebuilt to class P-6 and renumbered 2583 during 1928. Modifications included replacing the drivers with 69 inch diameter and replacement of the compound cylinders with single-expansion cylinders. Number 2583 was retired and sold for scrap in December 1953.
Photo Date:
1/1/1904
Upload Date:
6/26/2010 11:38:57 AM
Location:
Philadelphia, PA
Author:
Baldwin Locomotive Works
Categories:
Roster,Steam
Locomotives:
CBQ 2700(4-4-2)
Views:
982
Comments:
0
Title:
CB&Q 4-4-2 P-3-C 2702
Description:
Chicago Burlington & Quincy Railroad 4-4-2 class P-3-C 2702 at Denver, Colorado on an unknown date in 1910, photograph by O. H. Means, print by Gordon C. Bassett, Chuck Zeiler collection. Number 2702 was built by Baldwin in 1904 (c/n 24651) as a balanced compound, rebuilt in 1927 to a simple Atlantic type, reclassed as P-5 and renumbered to 2558, retired in June 1942.
Photo Date:
1/1/1910
Upload Date:
6/2/2014 1:15:12 PM
Location:
Denver, CO
Author:
O. H. Means
Categories:
Steam
Locomotives:
CBQ 2702(4-4-2)
Views:
487
Comments:
0
Title:
CB&Q 4-4-2 P-3-Comp 2718
Description:
Chicago Burlington & Quincy Railroad 4-4-2 class P-3-Compound 2718 at Philadelphia, Pennsylvania, sometime in 1905, photo by the Baldwin Locomotive Works, Chuck Zeiler collection. The following is from the book, Steam Locomotives Of The Burlington Route, by Bernard G. Corbin and William F. Kerka: The P-3-C engines were of the balanced-compound type. Twenty of these were built by Baldwin gn 1904 and 1905, and were assigned to the road as 2700-2719. The first ten has 78 inch drivers while the rest were fittted with 74 inch drivers. The locomotives had all four of their cylinders in the same horizontal plane. The high-pressure cylinders were placed between the frame and drove the first pair of drivers through a cranked axle. The outside low-pressure cylinders were coupled to the second pair in the usual manner. Stephenqon link motion controlled the steam distribution through piston valves. The inside and outside cranks on the same side were positioned 180 degrees apart so as to neutralize the disturbing forces. The first engine of this class had a one-piece, forged-steel crank axle. The rest had axles built up from nine separate pieces, this type proved more satisfgctory. In general appearance, the P-3-C engines were similar to the P-2-C Atlantics except that the cylinders were located further forward to accommodate the inside drsving rods to the first axle. This also resulted in a somewhat longer boiler and tube length, 19 feet for the P-3-C compared to 16 feet 9 inches for the P-2-C. Apparenuly there was a design change in the tenders, as this photo shows the roll-top design, and the photo of 2700 shows a rectangular design. Number 2718 was rebuilt to class P-5 and given road number 2574 during 1924. This was&accomplished by adding new (single expansion) cylinders, new front engine frame, Schmidt-type superheater, new tube sheets and tube arrangement, and the application of Walschaerts valve gear. The eight foot long cabs were eventually replaced with shorter ones. Number 3574 was retired in May 1947.
Photo Date:
1/1/1905
Upload Date:
6/27/2010 3:20:23 PM
Location:
Philadelphia, PA
Author:
Baldwin Locomotive Works
Categories:
Roster,Steam
Locomotives:
CBQ 2718(4-4-2)
Views:
973
Comments:
0
Title:
PRR 2759, E-2B, 1905
Description:
Here is a builder's photo of Pennsylvania Railroad engine #2759, an E-28 (4-4-2) "Atlantic" built by the Baldwin Locomotive Works during 1905 and retired in September of 1917 after just 12 years of revenue service.
Photo Date:
7/7/1905
Upload Date:
6/20/2020 10:16:46 AM
Location:
Eddystone, PA
Author:
Thomas C. Ayers
Categories:
Steam
Locomotives:
PRR 2759(4-4-2)
Views:
204
Comments:
0
Page
2
of
2
<-Prev
1
2
Site Design ©2001-2020 Tim Huemmer
Photos © respective authors
Contact:
info@rrpicturearchives.net
